Layout Image

Technical Specs

ER Tape is a unique self bonding silicone rubber tape suitable wherever a tough, permanently resilient, void-free insulation is required. ER Tape is self-adhering and self-fusing, curing in 24 hours at room temperature. Faster curing and a harder finish can be accomplished through the application of heat after wrapping. The temperature range for this self fusing silicone rubber tape is -60°C t0 200°C for continuous use; -65°C to 260°C for intermittent use.  UL 510 recognized.

WIDTH
THICKNESS
AVERAGE
ROLL LENGTH
NOMINAL WEIGHT
PER ROLL
inch
mm
inch
mm
Feet
meters
pounds
kilogram
RECTANGULAR
*1.0 25.4 .020 .508 12 3.658 .368 .1669

*Standard Sizes

CHARACTERISTICS OF SILICONE RUBBER TAPE

PROPERTY TEST METHOD PERFORMANCE
Operating Temperature Range:
Continuous
Intermittent
-60°C to 200°C
-65°C to 260°C
Specific Gravity ASTM D792 1.2
Hardness, Durometer, Shore A
Room-cured — 24 Hours
Cured at 300°F — 24 Hours
Cured at 480°F — 24 Hours
ASTM D2148 50
70
75
Tensile Strength, psi, minimum ASTM D119 700
Elongation, %, minimum ASTM D119 300
Bond Strength, pounds, minimum MIL CID-A-A-59163 2
Adhesion, inches unwind, maximum ASTM D2148 3
Cold Brittle Point, °C, maximum ASTM D746 -65
Water Absorption, % max, by weight MIL CID-A-A-59163 3
Dielectric Strength, volts/mil, minimum
Thickness 0.020 inch
MIL CID-A-A-59163 400
Dielectric Constant, 1 KHz ASTM D150 2.95
Dissipation Factor, 1 KHz ASTM D150 <0.0004
Volume Resistivity, ohms/cm, minimum MIL CID-A-A-59163 3×10